1. Growth of the Optical Module Market
As AI demand grows, optical module transmission speeds are increasing across the market. The optical module market is projected to grow rapidly from 450 million units in 2025 to 730 million units in 2028. By transmission speed, segments below 400G and the 800G segment are expected to maintain stable growth through gradual but steady increases, while 1.6T and 3.2T are projected to expand significantly following their launch in 2026–2027. Consequently, the optical module market is expected to grow rapidly, driven by stable growth in existing speed segments and rapid growth in next-generation, high-speed segments.
2. Optical Module Trends
As ASIC switch bandwidth increases, both per-lane transmission speeds and power consumption in optical modules are rising. Even with conventional pluggable modules, per-lane speeds have increased from 100G to 200G. XPO, a next-generation module offering performance equivalent to 8 OSFP modules, is expected to consume 400W or more of power, with its input voltage increasing from 3.3V to 48V. Compared with XPO, the next-generation module, CPO offers better power efficiency and lower signal loss. An advantage that XPO has is that it is easier to replace and thus is easier to maintain. Each approach has advantages and disadvantages, so the appropriate solution should be selected for the intended application.
3. MLCC Adoption Trends in the Optical Module Market
As optical module transmission speeds and power consumption increase, both the total number of MLCCs used and their total capacitance are rising. In particular, a comparison of 800G SPF and 1.6T SPF modules shows a sharp increase.
Two main types of capacitors are needed at different positions within optical modules: compact, high-capacitance capacitors for decoupling, and broadband capacitors with low loss at high frequencies for AC coupling.
① Decoupling capacitors are mainly used on power lines. As optical modules consume more power, compact, high-capacitance capacitors for low-voltage operation are required. Higher input voltages also require 100V capacitors for 48V input lines.
② AC coupling capacitors are mainly used on signal lines. As ASIC switching bandwidth and transmission speeds increase, broadband capacitors with low insertion loss even at 67GHz are required.
4. Samsung Electro-Mechanics MLCC Solutions
Samsung Electro-Mechanics offers solutions in three main areas according to capacitor placement within optical modules.
First, the company is expanding its X5R/X6S lineup to achieve smaller sizes and higher capacitance in decoupling capacitors.
- New 2.5V ultra-high-capacitance lineup: 0201 inch, 10uF, X6S / 0402, 47uF, X6S / 0603, 100uF, X6S
- Planned developments : 01005 inch, 1uF, X6S, 4V / 0201, 4.7uF, X5R, 6.3V / 0402, 22uF, X5R, 6.3V
- Ultra-high-capacitance developments : 0201 inch, 15uF, X6S, 2.5V / 0402, 68uF, X6S, 2.5V / 0603, 150uF, X6S, 2.5V
Second, the company offers a 100V lineup of XPO input capacitors for 48V input voltages, with capacitances of 100nF–10uF in sizes from 0603 inch to 1210 inch.
Third, for AC coupling capacitors, Samsung Electro-Mechanics is developing both MLCCs and silicon capacitors in parallel to address signal lines requiring low loss at high frequencies. For MLCCs, the company is preparing 0402mm 100nF and 220nF products. Regarding silicon capacitors, we are preparing a lineup of 0402mm 21nF and 0603mm 22nF products which support frequencies up to 110GHz.
(Please contact us separately for detailed specifications for each model.)
|
① Decoupling Cap |
② AC Coupling Cap |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
MP Now Under development
|
Broadband Cap
Under Development Si Cap MLCC |
Please click here for sample requests or any other inquiries.
USA (semai.newsletter@samsung.com)
EU (semcoeurope@samsung.com)
SEA (sempl.automlcc@samsung.com)
CHN (semco.automlcc@samsung.com)
JPN (semj.automlcc@samsung.com)
KOR (automotive.sem@samsung.com)